- There are different modules available for changing direction
Products
Multi Angle Ball Sorter
Application
The MABS is used in automated conveyor systems to accurately and gently eject products at high throughput rates. It is ideal for sorting lines, picking lines and conveyor belt merging points.
System
The MABS is a fully motorised 24VDC ejector without pneumatic components. It uses Itoh Denki's POWER MOLLER technology and can be easily integrated into existing conveyor systems.
Multiple MABS units can be combined to transport products of various sizes (from 100 × 150 mm, up to 30 kg). Compatible with F-RAT NX for advanced sorting solutions.
Positioning
It enables flexible ejection to the left or right at angles of 30°, 45° or 90°. Its non-stop transfer sequence prevents bottlenecks in the material flow.
Drive
The drive is powered entirely by 24 VDC motors. No pneumatics are required, which simplifies installation and maintenance and reduces operating costs.
Width
From 398 mm to 798 mm – suitable for various conveyor frames and product sizes.
Height
Only 175 mm, ideal for use in overhead or multi-storey conveyor systems.
Surface
Protected module surfaces reduce the risk of injury and enable safe operation in working environments with close contact to the conveyor.
Turning unit
Use
Transfer of the material to be conveyed to various conveyor systems in the same direction of conveyance.
To turn the material to be conveyed in any direction for the next processing steps.
System
A ball bearing turntable is used as the turning unit. Rotation can be carried out manually or power-driven.
Positioning
Manual fixing using locking bolts
With chain drive (max. 180° swivel range)
With central drive (free positioning)
Drive
Manual or with three-phase gear motor 230/400 V – 50 Hz
Conveyor width
Adapted to the respective roller conveyor system.
Design Height
300 mm
Accessories
Lift table or pneumatic lifting unit
Surface finish
Painted in RAL colours
Chain discharge section
Use
As an alternative to roller conveyors for conveying pallets width-wise.
Integrated in roller conveyors as a lateral conveying unit.
System
Several tracks with chains on slide rails are driven via a central motor.
Positioning
Free choice of number of tracks
Any lengths up to 6000 mm
Drive
Three-phase gear motor 230/400 V – 50 Hz
Central motor shaft deflection wheels
Track spacing
Adapted to the roller conveyor system and material to be conveyed.
Design Height
300 mm
Accessories
End stop, lateral guide, stopper cylinder
Surface finish
Painted in RAL colours
