It's designed for conveying lines with light and medium loads (up to max. 300 kg) and is suitable for working environments such as those exposed to liquids and dust.
ELECTROMECANICAL
Direct current and brushless 24 VDC
24 VDC (+/- 10 %) - ripple ratio < 10 %
Insulation class
E
Operation at 40°C
Continuous: 100%
Intermittent: 1440 starts / hour maxi
Minimum duty cycle = 1s ON / 1s OFF
ED = ON / (ON + OFF) ≤ 40 %
Brakes
Servo-brake
Protection index
IP54
Cable length
500 mm with M8 connector - 5 pins snap-in type
Protection
Against overload by integrated thermistor
Against polarity reversal 0 - 24 VDC
Current limitation within circuit board
Integrated fuse 8A
Thermal protection (> 95°C for circuit board)
Protection against under supply (over 1s under 15 VDC)
Protection against induced voltage (> 40 VDC over 2s)
Protection against motor lock (> 0.5s)
Environment
0°C / + 40°C - no condensation - or corrosive or explosive atmosphere
Vibrations < 0,5 G
Sound level
≈ 54 dB nominal 1 meter away
Speed code
17 30 60 90
Reduction ratio
1/44,90 1/26,67 1/12,64 1/7,5
Start / Stop
Start: ≥ 2.0 VDC impedance ≥ 35kΩ
Stop (servo-brake): 0 ~ 1.9 VDC / Start
Speed variation
By external voltage,10 speeds, impedance ≥ 35kΩ
Error signal
NPN open collector, thermal, low voltage, back EMF.
Error signal is discharged when motor is locked condition for approx. 6s. Error signal is discharged when there is a speed deviation of +/- 20% from set speed for 10s.
