Specifications

Conveying angle

30°, 45°, 60° and 90°

Nominal radius

1.900 mm and 2.600 mm

Nominal width

450 mm until 1.050 mm

Conveying height

min. 350 mm

Conveying speed

max. 1,2 m/s

Load capacity

50 kg/lfm

Accessories

Supports, Corvers

Options

Customized dimensions, e.g. angels, radii or width
Side guards
Adjustable conveying speed
Reversing operation
Sensors, e.g. for flow monitoring
Without support or with ceiling suspension

Flexible use

The frame of the belt curves consists of stable, torsion-free aluminium profiles. The combined drive and tensioning unit ensure low-noise-operation. Coated drive pulleys and tapered conveyor pulleys are used for optimum power transmission. The belt drive works based on friction locking and is capable on conveying piece weights up to 50 kg/m.

Ergonomic

The possibility of delivering belt curves with individual conveyor angles guarantees a high degree of flexibility. Plug-on motors are used as drives, with the drive position located on the inside or outside of the pulley, depending on the conditions. This compact and lightweight design allows easy integration into existing systems. In addition, it is possible to manufacture belt curves with individual conveying angles. These are suitable for continuous operation and are virtually maintenance-free.

Conveyor belt

An antistatic belt with two fabric layers is used as standard, optionally available with smooth or structured carrying side. On request, the belt conveyor can also be supplied with a food-safe or flame-retardant belt.

Belt adjustment

All moving parts are enclosed or, like the lower run, covered with perforated sheet metal. Fine adjustment is nevertheless possible without removing protective plates.

Side guards

These are available in various heights and can be easily and seamlessly added to guards on existing conveyor system.