Frame structure

Sheet steel profile (wall thickness 3 mm) with welded cross braces
Chain guard cover closed completely

Dimensions

Chain case: 120 mm x 60 mm x 3 mm
L-profile: 80 mm x 40 mm x 3 mm
Roller spacing: adapted depending on load

Conveyor rollers

Kraus conveyor rollers series 5020 accumulation drive
Galvanised steel tube Ø 50 mm x 1.5 mm
Steel axle Ø 12 mm with internal thread M8x15, with double chain wheel, steel or PVC: 1/2" x 5/16", number of teeth = 14

Drive

Chain drive with three-phase gear motor 230/400 V – 50 Hz
The conveyor rollers are driven by a 1/2" x 5/16" chain from roller to roller.
The force is transmitted to the tube by means of the slip coupling.
Motor position: in the centre under the frame structure
Standard transport speed: 6-24 m/min

Conveyor width

The width is determined by the properties and weight of the unit load – the unit load should be resting on at least 3 rollers
Standard widths: 470 mm, 670 mm, 870 mm
Standard conveyor lengths: 1905 mm, 3048 mm, 3810 mm, 4953 mm, 5715 mm

Surface finish

Painted in RAL colours/galvanised

Advantages

Transport without accumulation pressure
Sturdy design
Safe to use thanks to chain guard cover
Low-noise running