Frame structure

Sheet steel profile (wall thickness 5 mm) with welded cross braces
Chain guard cover closed completely

Dimensions

Chain case: 150 x 70 x 5 mm
L-profile: 100 x 50 x 5 mm
Roller spacing: adapted depending on load

Conveyor rollers

Kraus conveyor rollers series 5105
Galvanised steel tube Ø 80 mm x 2 mm / Ø 89 mm x 3 mm
Steel axle Ø 20 mm with internal thread M10x20, with double chain wheel, steel: 5/8" x 3/8", number of teeth = 15

Drive

Chain drive with three-phase gear motor 230/400 V – 50 Hz, IP55
The conveyor rollers are driven by a 5/8" x 3/8" chain from roller to roller
 

Motor position: in the direction of transport, in the centre under the frame structure
Standard transport speed: 6–30 m/min
Conveyor width: the width is determined by the properties and weight of the unit load – the unit load should be resting on at least 3 rollers

Standard belt widths: 985 mm, 1185 mm
Conveyor length: on request, depending on the roller spacing

Surface finish

Painted in RAL colours/galvanised

Advantages

Conveyance of pallets, skeleton containers, boards and barrels
Sturdy design
Very good transmission of force
Safe to use thanks to chain guard cover
Low-noise running
Conveyance of unit loads horizontally or at a slight upward gradient