Frame structure

Sheet steel profile (wall thickness 3 mm) with welded cross braces
Chain guard cover closed completely

Dimensions

Chain case: 120 x 60 x 3 mm
L-profile: 80 x 40 x 3 mm
Roller spacing: adapted depending on load

Conveyor rollers

Kraus conveyor rollers series 5020
Galvanised steel tube Ø 50 mm x 1.5 mm
Steel axle Ø 12 mm with internal thread M8x15, with double chain wheel, steel: 1/2" x 5/16", number of teeth = 14

Drive

Chain drive with three-phase gear motor 230/400 V – 50 Hz, IP55
The conveyor rollers are driven by a 1/2" x 5/16" chain from roller to roller Motor position: in the centre under the frame structure
Conveying speed: Standard speed 6–30 m/min

Conveyor width

The width is determined by the properties and weight of the unit load – the unit load should be resting on at least 3 rollers

Standard widths: 470 mm, 670 mm, 870 mm
Conveyor length: on request, depending on the roller spacing

Surface finish

Painted in RAL colours/galvanised

Advantages

Conveyance of unit loads horizontally or at a slight upward gradient
No downward gradient required
Sturdy design
Very good transmission of force
Safe to use thanks to chain guard cover
Low-noise running