Gravity rollers - for light loads

Title
Gravity rollers
Subtitle
Light-duty applications

Choose from a comprehensive range!

  • For applications with manual or gravity drive
  • For light unit loads
  • In different versions and for many different purposes
  • Made of steel, plastic, aluminium and stainless steel

You will find an overview of KRAUS conveyor rollers here

 

Projects

Adaptation of our conveying elements to on-site conditions

Adaptation of our conveying elements
to on-site conditions
Properties

One example of the flexible adaptation of our conveying elements to on-site conditions at our customers is the mini tapered idler roller curve shown with 2x 90° and gradient, in the form of a helix, as well as straight sections between the curves and as a transfer section to the downstream conveyor belt.

Requirement

The packages from the foiling machine have to be transported between an existing staircase outside the hall into the neighbouring hall and overcome a height difference of 1,000 mm.

The equipment was put into operation exactly on schedule thanks to the exact coordination between all those involved in the projects.

Customer/branch: food industry

 

Products

Low friction roller series 500

Cost-saving | low friction | low dead weight | also available in a stainless steel version

Low friction roller series 500
Use

In-house unit handling and Transport
Resistant to temperatures from –10°C to +40°C

Maximum dynamic load capacity

Conveyor roller Ø 20 mm 0.10 kN
Conveyor roller Ø 30 mm 0.15 kN
Conveyor roller Ø 40 mm 0.15 kN

Maximum conveying speed

0.3 m/s for conveyor roller with Ø 20, Ø 30 mm
0.5 m/s for conveyor roller with Ø 40 mm

Tube dimensions

Galvanised steel tube acc. to DIN 2394: Ø 20 x 1.5 mm, Ø 30 x 1.0 mm, Ø 40 x 1.5 mm
PVC tube: Ø 20 x 1.5 mm, Ø 30 x 1.0 mm, Ø 40 x 1.5 mm


 

Axle

Bright steel Ø 6, Ø 8, Ø 10 mm
Versions: Internal thread, external thread, spring-loaded axle, rigid axle, width across flats
Optional V2A axle

Bearing

Low friction bearings: thermoplastic with steel ball raceway
Optional Stainless steel ball raceway

Low friction roller series 1000

Used in container handling Ø 50 mm | cost-saving | low friction | also available in a stainless steel version

Low friction roller series 1000
Use

For in-house unit handling and Transport
Resistant to temperatures from –10°C to +40°C

Maximum dynamic load capacity

Conveyor roller Ø 50 mm 0.20 kN

Maximum conveying speed

0.5 m/s for conveyor roller with Ø 50 mm

Tube dimensions

Galvanised steel tube acc. to DIN 2394: Ø 50 x 1.5 mm
PVC tube: Ø 50 x 2.8 mm
V2A tube: Ø 50 x 1.5 mm

 

Axle

Bright steel Ø 6, Ø 8, Ø 10, Ø 12 mm
Versions: Internal thread, external thread, spring-loaded axle, rigid axle, width across flats
Optional V2A axle

Bearing

Low friction bearings: thermoplastic double steel ball raceway
Optional Double stainless steel ball raceway

 

Low friction roller series 2000

Galvanised sheet steel bearing plate | with deep-drawn hardened tapered ball bearing, lubricated | can also be used in the high-temperature and low-temperature range | angled roller ends for pushing the material to be conveyed on from the side

Low friction roller series 2000
Further advantages

Low friction
Anti-static conveyor roller

Use

In-house unit handling and Transport
Resistant to temperatures from -30 °C to +60 °C

Maximum dynamic load capacity

Conveyor roller Ø 30 mm 0.4 kN
Conveyor roller Ø 40 mm 0.8 kN
Conveyor roller Ø 50 mm 1.1 kN
Conveyor roller Ø 60 mm 1.2 kN
Conveyor roller Ø 80 mm 1.5 kN

Maximum conveying speed

0.6 m/s for conveyor roller with Ø 30, Ø 40 mm
0.8 m/s for conveyor roller with Ø 50, Ø 60, Ø 80 mm

 

Tube dimensions

Galvanised steel tube acc. to DIN 2394: Ø 30 x 1.5 mm, Ø 40 x 1.5 mm, Ø 50 x 1.5 mm, Ø 60 x 1.5 mm, Ø 80 x 2 mm

Axle

Bright steel Ø 8, Ø 10, Ø 12 mm, SK11 mm
Versions: Internal thread, external thread, spring-loaded axle, rigid axle, width across flats

Bearing

Galvanised sheet steel with deep-drawn hardened tapered ball bearing, lubricated

Optional

Special version for the high-temperature range

 

Gravity roller series 2500

With precision ball bearing | suitable for medium to higher weight loads | splashwater- and dust-protected thanks to sealed ball bearing | anti-static conveyor roller

Gravity roller series 2500
Further advantages

Angled roller ends for pushing the material to be conveyed on from the side
Suitable for high Speeds

Use

For in-house unit handling and Transport
Resistant to temperatures from –10°C to +40°C

Maximum dynamic load capacity

Conveyor roller Ø 50 mm 1.2 kN
Conveyor roller Ø 60 mm 1.5 kN
Conveyor roller Ø 63 mm 1.8 kN
Conveyor roller Ø 80 mm 2.0 kN

Maximum conveying speed

1.4 m/s for conveyor roller with Ø 50, Ø 60, Ø 80 mm

 

Tube dimensions

Galvanised steel tube acc. to DIN 2394: Ø 50 x 1.5 mm, Ø 60 x 1.5 mm, Ø 60 x 2 mm, Ø 80 x 2 mm

Axle

Bright steel Ø 10, Ø 12, Ø 14, Ø 15 mm, SK11 mm
Version Internal thread, external thread, spring-loaded axle, rigid axle, width across flats

Bearing

Galvanised steel plate, precision ball bearing with metal seals

Optional

Special version with precision grooved ball bearing
With rubber seals
Special version with axle Ø 17 mm

 

Gravity roller series 3000

Suitable for manufacturing plastic rollers | labyrinth seal for splashwater and dust protection | stainless steel version possible | with precision ball bearing

Gravity roller series 3000
Further advantages

Plastic bearing plate for precision grooved ball bearing
Suitable for high Speeds

Use

For almost any in-house use
Resistant to temperatures from –10°C to +40°C

Maximum dynamic load capacity

Conveyor roller Ø 50 mm 1.2 kN
Conveyor roller Ø 60 mm 1.6 kN

Maximum conveying speed

1.2 m/s for conveyor roller with Ø 50, Ø 60 mm
 

Tube dimensions

Galvanised steel tube acc. to DIN 2394: Ø 50 x 1.5 mm, Ø 60 x 1.5 mm

Axle

Bright steel Ø 8, Ø 10, Ø 12, Ø 14, Ø 15 mm, SK11 mm
Versions Internal thread, external thread, spring-loaded axle, rigid axle, width across flats

Bearing

Plastic bearing plate with precision grooved ball bearing and labyrinth seal
Optional Special version with precision grooved ball bearing made of stainless steel

Gravity roller series 3500

Plastic bearing plate with precision grooved ball bearing | suitable for high speeds | labyrinth seal for splashwater and dust protection | stainless steel version possible

Gravity roller series 3500
Further advantages

Angled roller ends for pushing the material to be conveyed on from the side
Anti-static conveyor roller

Use

For almost any in-house use
Resistant to temperatures from –10°C to +40°C

Maximum dynamic load capacity

Conveyor roller Ø 50 mm 1.2 kN
Conveyor roller Ø 60 mm 1.6 kN

Maximum conveying speed

1.2 m/s for conveyor roller with Ø 50, Ø 60 mm
 

Tube dimensions

Galvanised steel tube acc. to DIN 2394: Ø 50 x 1.5 mm, Ø 60 x 1.5 mm

Axle

Bright steel Ø 8, Ø 10, Ø 12, Ø 14, Ø 15 mm, SK11 mm
Versions Internal thread, external thread, spring-loaded axle, rigid axle, width across flats

Bearing

Plastic bearing plate with precision grooved ball bearing and labyrinth seal
Optional Special version with precision grooved ball bearing made of stainless steel
 

Gravity roller series 3700

Electrically conductive | highly efficient | absolutely maintenance- and servicing-free thanks to precision grooved ball bearings | simple transverse movement of containers thanks to the tapered shape of the ends of the conveyor rollers

Gravity roller series 3700
Further advantages

Guaranteed electrically conductive (contact resistance < 1000 kΩ)
Extremely long product service life of up to 80,000 hours (= up to 20 years in two-shift operation)
Precision grooved ball bearings of the series 6202 (optionally ZZ or 2RS seal)
The labyrinth seal provides protection from splashwater and coarse dirt
Minimum operating noise thanks to plastic roller base and
grooved ball bearings acc. to DIN
Special safety lock stops the bearing plate becoming loose under load
High-quality workmanship with customisable bearing plate design options

Use

For in-house unit handling and Transport
Resistant to temperatures from –10°C to +40°C

Maximum dynamic load capacity

Conveyor roller Ø 50 mm 3 kN
Series 3760 Round belt interlocking up to a load of 0.3 kN
Standard bead dimension A = 40 mm, B = 30 mm for round belts Ø 5 mm

 

Maximum conveying speed

2 m/s für Tragrolle mit Ø 50 mm

Tube dimensions

Galvanised steel tube acc. to DIN 2394: Ø 50 x 1.5 mm
Optional V2A-tube Ø 50 x 1.5 mm

Axle

Bright steel Ø 8, Ø 10, Ø 12, Ø 14 mm, SK11 mm
Versions Internal thread, external thread, spring-loaded axle, rigid axle, width across flats
Optional V2A axle

Bearing

Plastic bearing plate with precision grooved ball bearing 6202-ZZ (-2RS) and labyrinth seal